Certificate of standard TCVN 8491-3:2011/ ISO 1452-3:2009

PVC pipes bearing the DEKKO brand of DEKKO Group have been certified by the Directorate for Standards and Quality - QUACERT Conformity Certification Center in accordance with the requirements of TCVN 8491-3:2011/ ISO 1452 -3:2009. This is TCVN - Vietnamese Standard published by the Vietnam Institute of Standards and Quality (under the General Department of Standards, Metrology and Quality) and ministries, construction organizations, and science and technology ministries based on ISO standards 1452-3:2009.

TCVN 8491-3:2011/ ISO 1452-3:2009 is certified for PVC - Polyvinyl Chloride unplasticized (PVC-U) pipes for underground water supply, drainage and sewerage systems and Floating on the ground under pressure, nominal diameter from 21mm to 500mm.

With this standard. You are completely assured about the quality of PVC pipes, durability, high abrasion resistance, water safety when using DEKKO PVC pipes for your construction system. 

What is TCVN 8491-2:2011/ ISO 1452-2:2009?

TCVN 8491-3:2011/ ISO 1452-3:2009 is a standard that specifies requirements for piping systems and components made of unplasticized poly(vinyl chloride) (PVC-U). This pipe system is used for water supply, drainage and sewer systems that are located underground and above ground under pressureconditions.

This standard does not make any “regulations” for the potential “adverse” effects of products on domestic water quality.

Requirements and test methods for materials and components other than pipes are specified in ISO 1452-1, ISO 1452-1 and ISO 1491-4. The characteristics for system conformance (mainly for joints) are  specified  in EN ISO 8491-5.

This standard specifies the characteristics of pipes.

This International Standard in conjunction with ISO 1452-1 and ISO 1452-1 is applicable to injection-molded PVC-U pipes with or without a socket (as an integral or integral part), used for the following purposes:

a) The main water pipeline and water supply system is located underground;

b) Water transport system is placed on the ground both outside and inside the buildings.

c) Drainage and sewer systems are placed underground and above ground under pressure áp

This standard applies to plumbing systems for water supply under pressure at temperatures up to 25°C (cold water), for domestic and general purposes as well as for wastewater under conditions of high temperature. Pressure.

To better understand the standard TCVN 8491-3:2011/ ISO 1452-3:2009, please refer to the national standard.

Introduction of PVC pipes DEKKO

Dekko PVC pipes are one of the product lines being focused and developed by DEKKO Group. Plastic pipes are manufactured on advanced technology lines of GERMANY according to international standards ISO 1452 and ISO 4422-2:1996 with a variety of sizes from DN21 to DN500, a variety of pressure levels PN3,... , PN25.

With excellent quality, DEKKO PVC products are widely used in clean water supply systems, agricultural irrigation water supply systems, drainage systems, storm water drainage, or a variety of applications. in industry…

Modern machinery and equipment, raw materials are imported from Korea, Japan, Thailand, .... The team of experienced engineers always bring to the advantages of PVC DEKKO compared to other units such as long life, high corrosion resistance, high mechanical strength, good impact and pressure resistance, etc

If you are in need of opening an agent to supply DEKKO products or need a quote for PVC pipes. Please contact DEKKO's customer care team for the best consulting support. 
More about this source textSource text required for additional translation information
Send feedback
Side panels